Product Catalogue
Product Catalogue
Product Catalogue
High Performance injection System
น้ำยาเคมีเสียบเหล็กระบบฉีด รุ่น HIT-RE 500
Slow cure mortar and wide range of approved fasteners
Advantage
- Variable anchorage depths
(4 - 20 x anchor rod diameter), anchors can be set in narrow members and close to edges, variable anchorage depth depending on load - Suitable to install in every directions, floor, wall and overhead
- Suitable for underwater application and approve for use with sea water
- Wide range of approved fasteners e.g. reinforcement bar DB10-DB32 (in case of rebar bigger than DB32, please contact Hilti Engineering) and HIT-V anchor rods, M8 to M30
- Approve to use in contact with drinking water according to NSF and WRAS Standard
Applications
- Anchoring steel structures, machines, conveyor systems, crash barriers, noise-reduction walls, and stairs
- ideal for concrete overlay shear connectors and structural joints
Base Material
- Uncracked concrete
- Natural stone
Material
- Epoxy resin (Styrene-free) Mixing Ratio 3:1
HIT-HY 150 MAX Fast Curing Injection System
Maximum load and maximum productivity for premium anchoring and rebar applications in concrete
Applications
- Anchoring of structural steel connections (e.g. steel columns, beams, …)
- Anchoring of secondary steel structures (e.g. staircases, steel ledgers, …)
- Anchoring of railings/safety barriers
- Structural connections with post-installed rebars
- Structure renovation/upgrades with post-installed rebars
- Substitution of misplaced/missing rebars
Advantages
- Suitable for cracked and uncracked concrete with all anchoring elements
- Best approved loads according to latest international standards
- Faster curing to boost application productivity: design loads are achived after only 30 minutes at 20°C
- Works like cast in with post-installed rebars
- Free of styrene and plasticizers, low odor, reduced waste
- Quick and reliable design with the new Hilti Profis softwares
HIT-RE 500-SD High Performance Injection System
The high performance injection system code compliant for cracked concrete and seismic applications with a standard threaded rod for variable embedment, internally-threaded inserts, and rebar
Applications
- Anchoring of structural steel connections (e.g. steel columns, beams, …)
- Anchoring of secondary steel structures (e.g. staircases, steel ledgers, …)
- Anchoring of railings/safety barriers
- Structural connections with post-installed rebars
- Structure renovation/upgrades with post-installed rebars
- Substitution of misplaced/missing rebars
Advantages
- Suitable for cracked and uncracked concrete with all anchoring elements
- High approved loads according to latest international standards
- Long working time allowing for serial installation of elements
- Works like cast in with post-installed rebars and long working time that generates productivity for serial applications
- Works like cast in with post-installed rebars with quick and reliable design with Hilti PROFIS softwares
- Quick and reliable design with the new Hilti Profis software
HIT-HY 150-FR Injection Adhesive (New)
Fast, easy to use and reliable
Advantage
- One of the strongest, fast-curing
injectable adhesive mortars available for quicker working progress – permissible load values are achieved after a time of only 40 minutes at 30°C - Fastens in concrete without generating expansion forces, for trouble-free use close to edges and where anchors are closely spaced
- Wide range of approved fasteners both anchor rod and reinforcement bar
- Approved as a variable depth fastening system in conjunction with HIT-V anchor rods
- Safe to use, store and transport, contains no hazardous chemical substances, complies with health and safety regulations
Applications
- Fastening in uncracked concrete, e.g. steel beams and columns, supports for stairs and platforms, railings and safety barriers, machines or heavy pipes etc.
- Post-installation of rebar connections, e.g. for building extensions, additional supporting structures and the strengthening or replacement of steel reinforcement
Base Material
- Uncracked concrete
Material
- Methacrylate (Styrene-free) Mixing Ratio 3:1
HIT-V Anchor Rod
Anchor Rod used with Hilti Injection System HIT-RE, HY, HFX
Advantage
- Variety of sizes M6 – M39 (in Thailand, available only M8 – M24)
- Head marking: visual check of steel quality & embedment depth after installation
- Flexible embedment: allows to get different loads by changing the embedment depth of the rod >
- Use 1 rod to fasten base plates with several thicknesses by using the flexibility of variable embedment depth
- Minimum embedment depth is 4 times of rod diameter, allow working in small space/edge distance and saves installation time and saves money
Applications
- Install with Hilti Injection System HIT-RE, HY, HFX
Material
- HIT-V-5.8: steel strength grade 5.8 for M8 to M24, galvanized min. 5 microns
- HIT-V-8.8: steel strength grade 8.8 for M8 to M16, galvanized min. 5 microns
- HIT-V-F-5.8: steel strength grade 5.8 for M8 to M24, hot dipped galvanized min. 45 microns
- HIT-V-F-8.8: steel strength grade 8.8 for M8 to M16, hot dipped galvanized min. 45 microns
- HIT-V-R: stainless steel grade A4 for M8 to M24
